ASBESTOS ANALYSIS
Request for asbestos (asbestos) content analysis
Please follow the “Asbestos Analysis Manual for Preliminary Investigations Based on the Asbestos Rule [2nd Edition]”.
Analytical sample collection
Sample collection methods vary depending on the type of building material So please be careful.
In order to eliminate inhomogeneity, for each construction range, 3 places or more,About 10 cubic meters of sample per site Collect each one, Put each sample in a plastic bag or the like that can be sealed, then put the samples together and store them in a sealed vinyl bag, etc. Please do it. The sample collection of spray material is the corresponding spray material Always penetrates from the construction surface layer to the base Please do it and collect it.
From sample collection range Samples of at least 3 locations, about 100 per site Collect each one, After putting them in a plastic bag or the like that can be sealed, these samples are put together and stored in a sealed vinyl bag, etc. Please do it. If it is clear that partial refurbishment has been carried out, The existing part and the refurbished part are collected as separate analytical samples Please do it.
If you order, our workers will visit and collect samples for analysis.
Preparation of an analysis request
Please include the completed analysis request form with the analysis sample you are sending.
Please note that even if an analysis sample arrives at our company, we will not be able to accept it if an analysis request form has not been prepared.
Please pack the collected analysis sample and the analysis request form and send it to the address below.
Japan Health Association Asbestos Group Co., Ltd.
TEL: 06-6387-1515
- Please check that the analytical sample has not leaked out of the bag before shipping.
- Please check if the sample name is displayed on the collected bag.
- Please make sure that you have not forgotten to include the analysis request form when packing.
- Please pack the bag so that it does not tear due to impact during delivery.
After receiving the sample for analysis, the analysis will begin. The analysis results (bulletin) will be sent by email to the specified email address in approximately 1 week to 10 days (fax transmission is also possible). I will do it.
If the analysis is crowded or the number of samples to be analyzed is large, we will discuss the analysis delivery date.
After contacting us with the analysis results (preliminary report), we will prepare a report and send it out in about 10 days to 2 weeks.
If the number of copies of the report to be prepared is up to 3, we will prepare it within the analysis cost.
We will enclose an invoice when sending the analytical test result report. When you receive the report, please check the enclosed invoice.
If the invoice address is different from the report destination, please indicate the invoice delivery address separately. Once you have confirmed the analytical test result report and invoice, please make a transfer to the designated account within 1 month from the billing date.
Contact
Please feel free to contact us if you have any problems with improving the environment.
